One-Over-One Configuration that allows Horizontal and Vertical Pairing.

Overall height of rack is ~83” to pass through an 84” tall door opening.

Overall dimensions are ~33” wide x 38-5/8” deep.

Each cage has 6.25 sq. ft. of floor area. Interior height of each cage is minimum 32”.

Rack is supported on autoclavable Casters with 5” Dia. X 2” wide wheels, sealed SS bearings.  Front casters have Brakes.

All metal components are #304 stainless steel.  Autoclavable.

Polished Latches provided. (latches not to be bead blasted with Unit)

Hinged Doors are constructed of ½” diameter rod with 5/16” vertical rods on 1” centers.

Guillotine Sliding Animal Door on Front Hinged Cage Door.

Hinged Cage Door has Foraging Board with Wire Feeder (½” x ½” wire).

The primary frame members are fabricated of 1/8” thick SS plate.

All cages sides are fabricated of 16 Ga. SS sheet, half grid wire and sheet metal.

All sloping waste pans and troughs are fabricated of 16 Ga. SS sheet.

The caster base frame is elevated 10” off the ground for cleaning.

Caster Mounts have various “mouse holes” for cleaning top of casters off.

Waterline and Drinking Valves are mounted on solid side of rack.

Using specified drinking valves: from the Lixit Corporation, the L70, Order #915.

Double handled Squeeze Back that glides on Tivar Hot Plastic Bearings.

Socialization Panels on both sides of Rack, Solid Divider on LH Side, Grooming on RH.

Telescoping Mid-Section with self-storing floor, waste pan and ceiling panel.  This allows the Rack to be vertically paired.  No parts to remove from cage.

Handle/Bumper provided on rear of rack for maneuverability.

All units are bead blasted to a matte finish.  All Latches will be protected from process.