NHP Socialization Rack

with Telescoping Floor System - Catalog #46579

• One-Over-One Configuration that allows Horizontal and Vertical Pairing.

• Overall height of rack is 82-1/2” to pass through an 82-3/4” tall door opening.

• Overall dimensions are ~34-7/8” wide x 35” deep.

• Each cage has 6.25 sq. ft. of floor area based on outside of frame dim. of 30” x 32”.

• Interior height of each cage is 32”.

• Rack is supported on autoclave Casters with 5” Dia. X 2” wide wheels, sealed SS bearings.  Front casters have Brakes.

• All metal components are #304 stainless steel.  Autoclavable.

• Polished Latches provided. (latches not to be bead blasted with Unit)

• Hinged Doors are constructed of ½” diameter rod with 5/16” vertical rods on 1” centers.

• Horizontal Sliding Animal Door on Front Hinged Cage Door with Wire Feeder.

• The primary frame members are fabricated of 1/8” thick SS plate.

• All cages sides are fabricated of 16 Ga. SS sheet, half grid wire and sheet metal.

• All sloping waste pans and troughs are fabricated of 16 Ga. SS sheet.

• The caster base frame is fabricated of 1-1/2” square SS tube.

• The wire mesh panels above the dividers in each side are 1” x 1” with .162 dia. SS wire.

• Waterline and Drinking Valves are mounted on back wall.

• Double handled Squeeze Back that glides on Tivar Hot Plastic Bearings.

• Flush Pan with Drain Tube in rear of cage.

• Socialization Panels include a Solid, Grooming Contact and Visual Dividers.

• All units are bead blasted to a matte finish.  All Latches will be protected from process.