Configuration allows for Horizontal Pairing and increased vertical space.

Overall size of rack is ~48” Wide x 40” Deep x 83-3/4” Tall.

Each cage has 10.75 sq. ft. of floor area based on outside of frame dim. of 39”w x 40d”.

Interior height of each cage is 78” minimum.

Each rack is supported on SS Casters with 4” Dia. X 2” wide wheels, sealed SS bearings, #4.05109.925. Front casters have the Tech Lock Brakes # BRK2.

The caster base frame is fabricated of 1-1/4” square SS tube and 1/8” formed angle.

All metal components are #304 Stainless Steel.

Polished Latches provided. (Latches not to be bead blasted with Unit)

A Hinged Man Door provided on front of Unit with secure SS Latch/Lock.

Man Door has 3/8” Dia. Vertical Rods on 1-1/2” Center spacing.

The primary frame members are fabricated of 1/8” thick SS plate.

Cage back is 16 Ga. SS sheet.

A sloping waste pan on the floor is fabricated of 16 Ga. SS sheet.

Fixed Vertical Rod Side Panels are between the Top and Bottom dividers and above the Caster Base Frame are 3/8” dia. with a 3/8”dia. perimeter rod.

Heavy Duty Waterline is hinged for easy maintenance and drain to front of Unit.

Waterlines include Edstrom Fittings, Drinking Valves, Quick Disconnect and Drain.

A Squeeze Back and Double Handle Pull, glide on Bearing Blocks for smooth operation.

(4) Horizontal Socialization Dividers included on each side of Cage (1 LH, 1 RH)

Dividers are self storing with no parts to remove and glide on Bearing Blocks.

Both RH/LH Dividers consist of a Grooming Contact with 3/8” Dia. SS Vertical Rods on a1-1/2” Center spacing.

Lock Tabs provided at each Divider Handle for added security.

A Horizontal Sliding Animal Door provided on Front Man Door with secure SS Latch.  The Animal Door will be designed to match Transfer Box already in use.

Wall Lock Mechanism and Wall Bumpers provided.

Approval Drawings to be provided prior to fabrication and a prototype phase is optional.

All units are bead blasted to a matte finish.