Restraint Capture Tunnel

 

Catalog #46280

• Made with Aluminum and Stainless Steel materials.

• Approximate Dimensions of Tunnel are 18” wide x 28” tall x 75” long.

• Tunnel is 22” tall from casters, 28” overall with casters.

• Tunnel has Handles both ends for maneuvering.

• Supported on four 5” SS Casters.

• Tunnels made to pair with one another in several configurations.

• Tunnels will be divided into 3 equal sized chambers.

• Section closest to cage end will have restraint system.

• Restraint Wall to have a “Speedy” SS Acme Screw to expedite restraint wall.

• Restraint Wall operated by Wheel and will ride on support guides.

• Fixed Wall behind Restraint Wall provided to match rest of Tunnel.

• (2) Chambers have flip up Top Door Panels made out of 1” x 1” SS Wire Panel.

• Guillotine Doors on each end and center areas with secure SS Latches provided.

• Guillotine Doors & Latches will be able to lock in the open and closed positions.

• (5) Identical Guillotine Doors per Tunnel, ~17.5” wide x 25.5” tall.

• A Guillotine Door provided at center of one side of Tunnel to pair in “T” config.

• Removable Waste Pans under each chamber.

• Floor of Tunnel is 1” wide flat bar with ½” gaps running the width of Tunnel.

• “D” Rings attached to each side of the Tunnels for ratchet strap connection.

• Needs to pair with cage end and Tunnel ends.

• Tunnel walls are 3/8” Dia. Horizontal rods on 7/8” centers.

• Bead Blasted to a Matte Finish.