Two-Over-Two Configuration that allows easy Horizontal and Vertical Pairing.

Overall dimensions of rack are ~37” wide x 63-5/8” long x 82-3/8” tall.

Each cage has 6.25 sq. ft. of floor area.

Interior height of each cage is a minimum of 32” tall.

Each rack is supported on SS Casters with 5” Dia. X 2” wide wheels, sealed SS bearings. Front casters have the Tech Lock Brakes.

All metal components are #304 stainless steel.

SS Spring Loaded Latches provided & Heavy Duty Door Latch Mechanism provided.

Doors are constructed of ½” diameter rod with 1”x 3” .162 Dia. SS Welded Wire.

Hinged Front Cage Door with secure Door Lock Mechanism and Pad Lock Tab.

A Guillotine Animal Door is provided on each main cage door with secure latch.

Transfer Box Rods provided below all cage doors.

Linear Thermal Neutral Perches, Removable Feed Box provided.

The primary frame members are fabricated of 1” x 1” thick SS plate.

All cages sides are fabricated of 16 Ga. SS sheet metal.

Waste pans, drain tube and trough are fabricated of 16 Ga. SS sheet.

The caster base frame is fabricated of 1-1/2” square SS tube.

Heavy Duty Waterlines are plumbed in from the side with easy access to fittings.

Room for Heavy Duty Water Bottle Holder provided alongside Guillotine Door.

Water Bottle Holder provided with cages, 4 Total per Rack.

Single Handed Squeeze Back rides on Tivor Hot Plastic Bearing Blocks for smooth and quiet operation as does the latching angles through the squeeze latches.

Self-Storing Center Dividers for horizontal pairing are Solid, Wire and Transparent Dividers.

Secure locking mechanism provided for each Divider.

Mid Section allows for vertical pairing with removable floors, ceilings and waste pans.

Self-storing Horizontal Dividers on ends of Rack to Pair with existing C2SI One Over One Racks currently being used.

All units are bead blasted to a matte finish.