6.25sf Socialization  Catalog #48678

+ Tunnel  Catalog #48862

  • One-Over-One Configuration that allows Horizontal and Vertical Pairing.

  • Overall height of rack is 82-1/2” to pass through an 82-3/4” tall door opening.

  • Overall dimensions are ~34-7/8” wide x 35” deep.

  • Each cage has 6.25 sq. ft. of floor area.

  • Interior height of each cage is minimum 32”.  (Exceeds this, it’s ~33”)

  • Rack is supported on autoclavable Casters with 5” Dia. X 2” wide wheels, sealed SS bearings.  Front casters have Brakes.

  • All metal components are #304 stainless steel.  Autoclavable.

  • Polished Latches provided. (latches not to be bead blasted with Unit)

  • Hinged Doors are constructed of ½” diameter rod, base of door ¾” x ¾” wire.

  • Guillotine Sliding Animal Door on Front Hinged Cage Door with Wire Feeder.

  • Three Bar Perch provided on right hand side of cage and Transfer Box Rod provided.

  • Foraging Board provided with flip wire panel to attach turf material and latch securely.

  • The primary frame members are fabricated of 1/8” thick SS plate.

  • All cage sides are fabricated of 16 Ga. SS sheet, half grid wire and sheet metal.

  • Wire Panels above all Divider Frames are ¾” x ¾” Welded Wire.

  • The caster base frame is fabricated of 1-1/2” square SS tube.

  • Waterline and Drinking Valves are mounted on side wall, removable when needed.

  • Double Handle Squeeze Back and Perch that glides on Tivar Hot Plastic Bearings.

  • Double Divider Panels on both sides of Cage, Top and Bottom.

  • LH Dividers: Solid and ¾” x ¾” Wire Mesh, RH: Grooming Bars and ¾” x ¾” Wire Mesh.

  • A Removable Floor/Ceiling Cartridge that will house plastic waste pan.

  • Access Door at lower left corner of Cage Door and secure latch provided.

  • Wall Locks and Rail provided.  Customer to install rail for Wall Locks to attach to.

  • Removable Half Floor Panel, on top cage, to allow for vertical Socialization.

  • Mid-Section Door is solid and has Lock Tab on at least one side.

  • Back of Cage has a ¾” x ¾” Welded Wire Panel.

  • Back of Cage at Waste Pan will be ¾” x ¾” Welded Wire Panel to aid wash down.

  • Pairing Mechanism provided to allow unobstructed removal of cage from row.

  • All units are bead blasted to a matte finish.  All Latches will be protected from process.

  • Custom Designed to pair with Tunnels and Wall Divider Systems.

 

The Tunnel:

  • Configuration allows Horizontal and Vertical Pairing.

  • Custom designed to pair with Socialization Racks and Wall Dividers.

  • Overall height of rack is approximately 72-3/4”.

  • Rack is supported on autoclavable Casters with 5” Dia. X 2” wide wheels, sealed SS bearings.  Front casters have Brakes.

  • All metal components are #304 stainless steel.  Autoclavable.

  • Polished Latches provided. (latches not to be bead blasted with Unit)

  • The primary frame members are fabricated of 1” x 1” SS Box Tube.

  • Wire Panels are ¾” x ¾” Welded Wire.

  • The caster base frame is fabricated of 1-1/2” square SS tube.

  • Socialization Panels can include a Solid, Grooming Contact and Visual Lexan Dividers.

  • Latch/Lock provided to help secure Removable Floor, Waste Pan, Ceiling.

  • Pairing Mechanism provided to pair with Cages and Wall Divider Assembly