top of page

Socialization Rack  Catalog #49157

  • One-Over-One Configuration that allows Horizontal and Vertical Pairing.

  • Overall height of rack is ~83” to pass through an 84” tall door opening.

  • Overall dimensions are ~33” wide x 38-5/8” deep.

  • Each cage has 6.25 sq. ft. of floor area. Interior height of each cage is minimum 32”.

  • Rack is supported on autoclavable Casters with 5” Dia. X 2” wide wheels, sealed SS bearings.  Front casters have Brakes.

  • All metal components are #304 stainless steel.  Autoclavable.

  • Polished Latches provided. (latches not to be bead blasted with Unit)

  • Hinged Doors are constructed of ½” diameter rod with 5/16” vertical rods on 1” centers.

  • Guillotine Sliding Animal Door on Front Hinged Cage Door.

  • Hinged Cage Door has Foraging Board with Wire Feeder (½” x ½” wire).

  • The primary frame members are fabricated of 1/8” thick SS plate.

  • All cages sides are fabricated of 16 Ga. SS sheet, half grid wire and sheet metal.

  • All sloping waste pans and troughs are fabricated of 16 Ga. SS sheet.

  • The caster base frame is elevated 10” off the ground for cleaning.

  • Caster Mounts have various “mouse holes” for cleaning top of casters off.

  • Waterline and Drinking Valves are mounted on solid side of rack.

  • Using specified drinking valves: from the Lixit Corporation, the L70, Order #915.

  • Double handled Squeeze Back that glides on Tivar Hot Plastic Bearings.

  • Socialization Panels on both sides of Rack, Solid Divider on LH Side, Grooming on RH.

  • Telescoping Mid-Section with self-storing floor, waste pan and ceiling panel.  This allows the Rack to be vertically paired.  No parts to remove from cage.

  • Handle/Bumper provided on rear of rack for maneuverability.

  • All units are bead blasted to a matte finish.  All Latches will be protected from process.

bottom of page