top of page

NHP Socialization Rack

with Telescoping Floor System - Catalog #46579

  • One-Over-One Configuration that allows Horizontal and Vertical Pairing.

  • Overall height of rack is 82-1/2” to pass through an 82-3/4” tall door opening.

  • Overall dimensions are ~34-7/8” wide x 35” deep.

  • Each cage has 6.25 sq. ft. of floor area based on outside of frame dim. of 30” x 32”.

  • Interior height of each cage is 32”.

  • Rack is supported on autoclave Casters with 5” Dia. X 2” wide wheels, sealed SS bearings.  Front casters have Brakes.

  • All metal components are #304 stainless steel.  Autoclavable.

  • Polished Latches provided. (latches not to be bead blasted with Unit)

  • Hinged Doors are constructed of ½” diameter rod with 5/16” vertical rods on 1” centers.

  • Horizontal Sliding Animal Door on Front Hinged Cage Door with Wire Feeder.

  • The primary frame members are fabricated of 1/8” thick SS plate.

  • All cages sides are fabricated of 16 Ga. SS sheet, half grid wire and sheet metal.

  • All sloping waste pans and troughs are fabricated of 16 Ga. SS sheet.

  • The caster base frame is fabricated of 1-1/2” square SS tube.

  • The wire mesh panels above the dividers in each side are 1” x 1” with .162 dia. SS wire.

  • Waterline and Drinking Valves are mounted on back wall.

  • Double handled Squeeze Back that glides on Tivar Hot Plastic Bearings.

  • Flush Pan with Drain Tube in rear of cage.

  • Socialization Panels include a Solid, Grooming Contact and Visual Dividers.

  • All units are bead blasted to a matte finish.  All Latches will be protected from process.

bottom of page