One-Over-One Configuration that allows Horizontal Pairing only. Bat cages - Bats

Overall height of rack is 82-1/2” to pass through an 82-3/4” tall door opening.

Overall dimensions are ~34-7/8” wide x 35” deep. Interior height of each cage is 32”.

Is compatible with other Carter2 Systems caging equipment.

Each cage has 6.25 sq. ft. of floor area based on outside of frame dim. of 30” x 32”.

Rack is supported on autoclavable Casters with 5” Dia. X 2” wide wheels, sealed SS bearings.  Front casters have Brakes.

All metal components are #304 stainless steel.  Autoclavable.

Polished Latches provided. (latches not to be bead blasted with Unit)

Hinged Doors are constructed of ½” diameter rod with ½” x ½” SS Wire Mesh.

Horizontal Sliding Animal Door on Front Hinged Cage Door with ½” x ½” Wire Mesh.

The primary frame members are fabricated/formed with 1/8” thick SS plate.

Back of cages are fabricated of 16 Ga. SS sheet metal.

Removable Flush Waste Pans under cages.

Drain Trough with shield and drain tube provided for top cage sanitation.

The caster base frame is fabricated of 1-1/2” square SS tube.

Removable Water and Food Troughs provided.

Double handled Squeeze Back that glides on Tivar Hot Plastic Bearings.  Squeeze will stop ~6” from the front of the cage to prevent animal injury.

Fully Removable Socialization Panels on both RH/LH of cages. 

Removable Divider Panels are ½” x ½” SS Wire Mesh.

Attachment hooks provided to allow enrichment devices to be mounted to ceilings.

All units are bead blasted to a matte finish.  All Latches will be protected from process.