Catalog # 41253

 

All Stainless Steel Construction. Offers 12 Sq Ft of floor space.

 

4 Individual compartments to separate animals or pairing panels for socialization. When divider is removed, ramps and perches are common to both chambers.

 

Unique system of ramps and perches provide endless enrichment possibilites.

 

Dividers between cages have a Push/Pull Handle for smooth opertation.

 

Each compartment has a hinged door. A waterline with Quick Disconnect and Drain for each unit. Each compartment has individual drinking valves.

 

Removable dry waste pans shown. Sloped waste pans can be provided for wet systems.

 

We can custom design to fit your specific needs.

 

 

Ferret Cages view all images below

Ferret Enrichment Cage

Catalog # 42824

Designed for enrichment and socialization purposes, the ferret enrichment cage offers several perches and ramps for the animal’s enjoyment. Perches are made of a thermal neutral plastic material; ramps are made of wire mesh. Cage frame is constructed of 1-1/2” stainless steel square tubing with all walls made of wire panels. 5” casters support the cage and provide a simple means of transportation. To promote socialization the cage has four individual housing compartments separated by removable center dividers and mid section cartridges. Removable dividers and mid section allow both horizontal and vertical pairing of the four compartments. Each compartment also has a hinged main door that securely latches from the outside.

 

  • Overall dimensions: 30” wide x 55” long x 76” tall

  • Approximately 6 sq. ft. per compartment

  • All #304 stainless steel construction

  • Mid section waste pan removable for vertical pairing

  • Handles for simple maneuvering

  • Bead blasted to a matte finish

Ferret Enrichment Cage Catalog #46771

  • All 304 Stainless Steel construction.  (4) Individual housed compartments.

  • Offers ~10 SF of interior floor space when horizontally paired.

  • Approx. sizes of Units are 28” wide x 57” lg. x 70” tall.

  • Caster Base and Main Frame components constructed of SS 1-1/2’ X 1-1/2’ Box Tube.

  • Unit is supported on SS 5” Casters with Locking Casters on Front of Unit.

  • All walls constructed of .0162ga. SS Welded Wire Panels with #2 wire mesh.

  • Each compartment can Horizontally or Vertically pair with neighboring compartment.

  • Separation Panels provided between cages, center divider and floor/ceiling dividers.

  • Under Top Cages, a waste pan door is provided to secure floors, ceilings and waste pans in place.

  • Under Bottom Cages, SS Spring Loaded Latches provided to secure Waste Pans.

  • Waterline provided with a Quick Disconnect, a Drain and Drinking valves for each cage.

  • Water Bottle Holders provided with Bottles.

  • Feed Trays provided for each Cage.

  • Dividers between Cages have a Push/Pull Handle for smooth operation.

  • Integrated 3” x 5” Horizontal Card Holder on the top left side of each cage.

  • Units will be Bead Blasted to a Matte Finish.

Ferret Enrichment Cage Catalog #50109

  • All 304 Stainless Steel construction.  (4) Individual housed compartments.

  • Offers ~10 SF of interior floor space when horizontally paired.

  • Approx. sizes of Units are 28” wide x 57” lg. x 70” tall.

  • Each compartment can Horizontally or Vertically pair with neighboring compartment.

  • Separation Panels provided between cages, center divider and floor/ceiling dividers.

  • Under Top Cages, a waste pan door is provided to secure floors, ceilings and waste pans in place.

  • Under Bottom Cages, SS Spring Loaded Latches provided to secure Waste Pans.

  • Waterline provided with a Quick Disconnect, a Drain and Drinking valves for each cage.

  • Feed Trays provided for each Cage.

  • Dividers between Cages have a Push/Pull Handle for smooth operation.

  • Unit has provisions for various Resting Platforms and raised surfaces with various ramps for animals to climb within each cage or throughout the Unit for Enrichment.

  • Sloped Waste Pans for easy wash down or removable pans can be provided.

  • Handles provided along the ends of Unit for maneuvering.

  • Integrated 3” x 5” Horizontal Card Holder on the top left side of each cage.

  • Units will be Bead Blasted to a Matte Finish.