The Socialization Rack is constructed of all #304 stainless steel. One-Over-One configuration easily allows horizontal and vertical pairing. Full height dividers on each side of the cage provide 3 levels of socialization; visual, grooming, and solid respectively. Midsection components are removable and include a dry. When removed, the mid section is replaced with a wire panel half floor/full perimeter rod. The squeeze is guided by Tivor Hot bearing blocks for smooth and quiet operation, and the single handle design doubles as a perch. All doors, hinged and sliding allow for use of padlocks; including the horizontal animal door on each main cage door. Accessories include a hinged waterline, water bottle holder, a removable feed box, ID card, and ID code.
Cage Specifications:
Overall dimensions are 34-7/8” wide x 40” deep x 82-1/2” tall
Each cage has 6.25 sq. ft. of floor area
Interior height of 32”
Rack is supported by 5” dia. X 2” Colson casters with SS sealed bearing & Tech lock brakes
Rack is autoclavable
Cage is bead blasted to a matte finish
-
Configuration allows Horizontal and Vertical Pairing.
-
82-1/2” to pass through an 82-3/4” tall door opening.
-
Overall dimensions are ~34-7/8” wide x 35” deep.
-
Each cage has 6.25 sq. ft. of floor area.
-
Interior height of each cage is minimum 32”.
-
Rack is supported on autoclavable Casters with 5” Dia. X 2” wide wheels, sealed SS bearings. Front casters have Brakes.
-
All metal components are #304 stainless steel. Autoclavable.
-
Polished Latches provided.
-
Guillotine Sliding Animal Door on Front Hinged Cage Door
-
Waterline and Drinking Valves are mounted on side wall, removable when needed.
-
Single Handle Squeeze Back and Perch
-
A Dry Waste System provided.
-
Detachable Feeders provided.
-
Telescoping Mid-Section allows vertical pairing.
-
Access Door at lower left corner of Cage Door and secure latch provided.
