• Two-Over-Two Configuration that allows easy Horizontal and Vertical Pairing.

  • Overall dimensions of rack are ~37” wide x 63-5/8” long x 82-3/8” tall.

  • Each cage has 6.25 sq. ft. of floor area.

  • Interior height of each cage is a minimum of 32” tall.

  • Each rack is supported on SS Casters with 5” Dia. X 2” wide wheels, sealed SS bearings. Front casters have the Tech Lock Brakes.

  • All metal components are #304 stainless steel.

  • SS Spring Loaded Latches provided & Heavy Duty Door Latch Mechanism provided.

  • Doors are constructed of ½” diameter rod with 1”x 3” .162 Dia. SS Welded Wire.

  • Hinged Front Cage Door with secure Door Lock Mechanism and Pad Lock Tab.

  • A Guillotine Animal Door is provided on each main cage door with secure latch.

  • Transfer Box Rods provided below all cage doors.

  • Linear Thermal Neutral Perches, Removable Feed Box provided.

  • The primary frame members are fabricated of 1” x 1” thick SS plate.

  • All cages sides are fabricated of 16 Ga. SS sheet metal.

  • Waste pans, drain tube and trough are fabricated of 16 Ga. SS sheet.

  • The caster base frame is fabricated of 1-1/2” square SS tube.

  • Heavy Duty Waterlines are plumbed in from the side with easy access to fittings.

  • Room for Heavy Duty Water Bottle Holder provided alongside Guillotine Door.

  • Water Bottle Holder provided with cages, 4 Total per Rack.

  • Single Handed Squeeze Back rides on Tivor Hot Plastic Bearing Blocks for smooth and quiet operation as does the latching angles through the squeeze latches.

  • Self-Storing Center Dividers for horizontal pairing are Solid, Wire and Transparent Dividers.

  • Secure locking mechanism provided for each Divider.

  • Mid Section allows for vertical pairing with removable floors, ceilings and waste pans.

  • Self-storing Horizontal Dividers on ends of Rack to Pair with existing C2SI One Over One Racks currently being used.

  • All units are bead blasted to a matte finish.

 

Two-Over-Two Stacked

Primate Rack Catalog #45852